SL-MIPI-LVDS-HDMI-CNV
DSI2HDMI – flexible MIPI-DSI to LVDS/HDMI display interface converter
- MIPI-DSI to LVDS and/or HDMI display converter
- Integrated D-PHY1.1 (DSI1.02)
- From 1 up to 4 MIPI input data lanes
- Compatible with MIPI-DSI data packets: 18bpp, RGB666 and 24bpp RGB888
- Input bandwidth up to 6Gb/s (4 lanes)
- LVDS output clocking up to 154MHz
- Fully compatible with SoMLabs carrier board:
- VisionCB-8M-STD (dedicated to i.MX8M mini multicore MPU)
- VisionCB-STM32MP1-STD (dedicated to STM32MP1 multicore MPU)
- Plug & Play solution for SoMLabs customers
- Integrated stereo audio channel
- Connection with carrier board using FPC30 cable A-A type
SL-MIPI-LVDS-HDMI-CNV is flexible DSI2HDMI display converter. It converts MIPI-DSI to LVDS and/or HDMI protocols. The solution we dedicate to SoMLabs carrier boards equipped with MIPI-DSI interface (with FPC30 connector) but can be used in any MCU/MPU system. Converter is fully compliant with DSI1.02 and HDMI1.4 and converts video stream up to 1080p @60Hz/8b.
| Features | SL-MIPI-LVDS-HDMI-CNV v1.1 |
|---|---|
| Input interface | MIPI-DSI (DSI1.02) |
| Input MIPI data lanes | 1...4 (up to 1.5Gb/s each) |
| Output interfaces | LVDS and HDMI |
| HDMI standard | 1.4 (up to 1080p @60Hz) |
| LVDS output | 4 data lanes (up to 1 Gb/s each) |
| HDMI audio channel | stereo SPDIF/I2S up to 192 kHz |
| Input connector | FPC30 (SoMLabs MIPI-DSI standard, compatible with SoMLabs carrier boards) |
| MIPI cable type | FPC30 polarization A-A |
| Temperature range | -40÷+85°C |
SL-MIPI-LVDS-HDMI-CNV
DSI2HDMI – flexible MIPI-DSI to LVDS/HDMI display interface converter
Carrier Board (CB) for the VisionSOM-8Mmini with following main features:
- SODIM200 Interface
- 1xUSB 2.0
- 1x 10/100/1000Mbit/s Ethernet
- PCI (Single Lane)
- MIPI Display Connector
- Built-in Segger J-Link JTAG debugger
Carrier Board (CB) for the VisionSOM-STM32MP1 with following main features:
- SODIM200 Interface
- 1xUSB 2.0
- 1x 10/100Mbit/s Ethernet
- RGB Display Connector
- MIPI Display Connector
- Built-in ST-Link/v2-1 SWD debugger
| CPU Name | NXP i.MX8M plus |
| CPU Type | x4 Core ARM Cortex A-53 |
| RAM Capacity | up to 4GB |
| Flash Memory | up to 32GB |
| Ethernet | 2x Gigabit |
| USB | 2x USB 2.0/3.0 |
| Form Factor | SODIM260 |
7 inch LCD-TFT module (Riverdi RVT70HSLNWC00) with LVDS interface, integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with +5V power rail.
