Carrier Board for VisionSOM-STM32MP1 Module family
- Carrier Board (Base Board) compatible with the VisionSOM-STM32MP1 family of modules
- Ready-to-use development systems for building applications based on the VisionSOM-STM32MP1 modules
- Built-in ST-Link/V2-1 SWD debugger
- MIPI-DSI (2 lanes) and parallel LCD interface
- Built-in microSD card connector
- Communication interfaces (USB 2.0 host and client, 100 Mbit Fast Ethernet)
- Well-suited for applications in industrial automation
- Raspberry Pi compatible connectors
- Ideal for industrial IoT and embedded applications
VisionCB-STM32MP1-STD is a carrier board for the VisionSOM-STM32MP1 (STM32MP157) family of computer-on-modules which are powered by STMicroelectronics SOC STM32MP1 (dual core ARM Cortex-A7 + single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The carrier board connects with the SoM via a standard SODIMM connector.
VisionCB-STM32MP1-STD is equipped with ST-Link/v2-1 SWD debugger and Linux serial console port on USB vCOM.
|SoM Type||VisionSOM family of modules based on STMicroelectronics dual Cortex-A7 and single Cortex-M4 core STM32MP1|
|Built-in ST-Link/v2-1 SWD debugger|
|Raspberry Pi compatible connectors||2x20 pin header (male, 33 GPIOs)|
|SD card||dedicated MicroSD connector|
|USB Host||Type A connectors|
|Parallel interface||50-pin FFC/FPC Parallel RGB – 24-bit|
|MIPI-DSI interface||30-pin FFC/FPC connector|
|DC connector||Input Voltage 9-12V DC|
|RTC battery||Socket for CR1220|
|Consumer||0 to +70°C|
|Board Size||160mm x 100mm x 17mm|
The VisionSOM-STM32MP1 family is a SODIMM-sized SoM based on the STMicroelectronics STM32MP1 application processor which features a heterogeneous single or dual ARM Cortex-A7 cores (at speed up to 800MHz) together with an ARM Cortex-M4 core (at speed up to 209MHz) and GPU compatible with Open GL 2.0 ES standard
7 inch LCD-TFT module (made by Powertip) with integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with single power rail +3.3V.
Compact Switching DC Power Supply 12V/2A with DC 5.5×2.1 connector and EU plug
Compact Switching DC Power Supply 12V/2A with DC 5.5×2.1 connector and EU/UK/USA/AUSTRALIA adapters
MIPI-DSI to LVDS and/or HDMI display converter, compatible with SoMLabs carrier boards: VisionCB-8M-STD (dedicated to i.MX8M mini multicore MPU) and VisionCB-STM32MP1-STD (dedicated to STM32MP1 multicore MPU