SL-PS12V-2A-UNIV Power Supply

Power Supply
SL-PS12V/2A/UNIV

SoMLabs Carrier Boards can be powered by USB (from computers) or an external power supply. The external power supply is needed for higher power consumption, e.g. when a TFT display is used in the application.

Buy online

Switched-mode AC power supply 12V/2A with DC 5.5×2.1 connector and EU/UK/USA/AUSTRALIA adapters. The power supply has built-in overload, overvoltage and short-circuit protection. The power supply is Energy Efficiency Level VI compliant. The length of the output cable is 1.2m.

The DC 5.5×2.1 plug can be plugged into the DC socket on the carrier board.

Features SL-PS12V/2A/UNIV
Output 12V DC/2A
Input 90..264V AC
DC Connector 5.5x2.1
Power 24W
Included Adapters EU/UK/USA/AUSTRALIA
Dimensions 93.5x46x41mm
Operating Temperature 0..40°C
Cable length 1.2m

Carrier Board (CB) for the VisionSOM-6ULL with following main features:

 

  • SODIM200 Interface
  • 2xUSB 2.0
  • 1x 10/100 Mbits Ethernet
  • RGB Display Connector
  • Embedded Real-Time Clock
  • Industrial Temperature Range

Carrier Board (CB) for the VisionSOM-6ULL with following main features:

 

  • SODIM200 Interface
  • 2xUSB 2.0
  • 1x 10/100 Mbits Ethernet
  • RGB Display Connector
  • Arduino Connector

Carrier Board (CB) for the VisionSOM-8Mmini with following main features:

 

  • SODIM200 Interface
  • 1xUSB 2.0
  • 1x 10/100/1000Mbit/s Ethernet
  • PCI (Single Lane) 
  • MIPI Display Connector
  • Built-in Segger J-Link JTAG debugger

Carrier Board (CB) for the VisionSOM-RT with following main features:

 

  • SODIM200 Interface
  • 2xUSB 2.0
  • 1x 10/100 Mbits Ethernet
  • RGB Display Connector
  • Arduino Connector

Carrier Board (CB) for the VisionSOM-STM32MP1 with following main features:

 

  • SODIM200 Interface
  • 1xUSB 2.0
  • 1x 10/100Mbit/s Ethernet
  • RGB Display Connector
  • MIPI Display Connector
  • Built-in ST-Link/v2-1 SWD debugger
SL-PS12V/2A/UNIV


    Get a Quote

    captcha