VisionCB-6ULL-STD
Carrier Board for VisionSOM-6ULL Module family

  • Carrier Board (Base Board) compatible with the VisionSOM family of modules
  • Ready-to-use development systems for building applications based on the VisionSOM modules
  • Well-suited for applications in industrial automation
  • Communication interfaces (USB 2.0 host and client, 100 Mbit Fast Ethernet)
  • Arduino Uno Rev. 3 (3.3V and 5V) and Raspberry Pi compatible connectors
  • Ideal for industrial IoT and embedded applications
Buy online

VisionCB-6ULL-STD is a carrier board for the VisionSOM-6ULL family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

The carrier board connects with the SoM via a standard SODIMM connector.

Features VisionCB-6ULL-STD
SoM Interface
SoM Interface SODIMM200
SoM Type VisionSOM family of modules based on NXP i.MX6UL or NXP i.MX6ULL processor (ARM Cortex-A7 single core)
Expansion Connectors
Arduino Uno Rev. 3 1x8, 1x6, 1x8, 1x10 Pin Headers (Female)
Raspberry Pi compatible connectors 2x20 Pin Header (Male)
Communication Connectors
Ethernet 1x 10/100Mbit/s, RJ45
USB Host 2x Type A connectors
Console 1x MicroUSB B connector (via FTDI FT230 UART to USB converter)
Display
Interface 50-pin FFC/FPC Parallel RGB – 24-bit, (1366 x 768 Max. Resolution)
User Interface
5 Pushbuttons
5 LEDs
Power Supply
DC connector Input Voltage 9-12V DC
MicroUSB connector Input Voltage 5V DC
Temperature Range
Consumer 0 to +70°C
Mechanical Dimension
Board Size 130mm x 90mm x 17mm
Block diagram
CPU Name NXP i.MX6ULL
CPU Type x1 Core ARM Cortex A-7
RAM Capacity up to 1GB
Flash Memory up to 32GB
Ethernet 2x 10/100 Mbit/s
USB 2x USB 2.0
Form Factor SODIM200

7 inch LCD-TFT module (made by Powertip) with integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with single power rail +3.3V.

Compact Switching DC Power Supply 12V/2A with DC 5.5×2.1 connector and EU plug

Compact Switching DC Power Supply 12V/2A with DC 5.5×2.1 connector and EU/UK/USA/AUSTRALIA adapters

2.4/5GHz Balance Flex Antenna with solder cable, U.FL connector, Molex 146153-0100

2.4GHz Flex Antenna with solder cable, U.FL connector, Taoglas  FXP70.07.0053A

2.4GHz Wi-Fi Antenna, 5dBi, U.FL connector, 190mm Width

VisionCB-6ULL-STD


    Get a Quote

    captcha