VisionSOM-6ULL (SLS16Yx)
i.MX6-ULL NXP ARM Cortex-A7 single core industrial SoM computer
- Powered by NXP i.MX 6ULL application processor
- Core clock up to 900MHz
- Up to 1GB SDRAM DDR3L
- Up to 512MB NAND Flash / 32GB eMMC / uSD memory card
- Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v5.1 module
- Power-efficient and cost-optimized solution
- Ideal for industrial IoT and embedded applications
- Integrated security features
The VisionSOM-6ULL family is a SODIMM-sized SoM based on the NXP i.MX6 ULL application processor. The VisionSOM-6ULL features an advanced implementation of a single ARM Cortex-A7 core (at speed up to 900MHz).
The VisionSOM-6ULL is a low power highly integrated SoM featuring high computation power and 802.11b/g/n Wi-Fi and Bluetooth v5.1 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth BLE 5.1 module simplifies the carrier board. The VisionSOM-6ULL provides a variety memory configuration including flexible range of DDR3L, NAND, eMMC and SD memory card that meets our customers requirements.
The SoM supports connections to a variety of interfaces: two high-speed USB on-the-go with PHY, dual Ethernet, audio, display with touch panel and serial interfaces. In addition, the system supports industrial grade embedded applications.
| Features | VisionSOM-6ULL |
|---|---|
| CPU | |
| CPU Name | NXP i.MX 6ULL |
| CPU Type | Cortex-A7 |
| CPU Cores | 1 |
| CPU Clock (Max) | 900MHz |
| Memory | |
| RAM | 64...512MB |
| eMMC | 4...32GB |
| NAND | 128...512MB |
| uSD Card Slot | option |
| Display | |
| Interface | Parallel RGB – 24-bit, (1366 x 768 Max. Resolution) |
| GPU | |
| Graphics Acceleration | NXP PXP v2.0 2D Graphics Accelerator for LCD-TFT |
| Networking | |
| Wi-Fi | Wi-Fi 802.11b/g/n |
| Bluetooth | Bluetooth v5.1 |
| Ethernet | 2x 10/100Mbit/s (requires external Ethernet PHYs) |
| Connectivity | |
| RTC | Built-in (requires external battery) |
| I2C | up to 4 channels |
| SPI | up to 4 channels |
| CAN | up to 2 FlexCAN |
| UART | up to 8 channels |
| USB | 2 x USB2.0 OTG Host/Device |
| ADC | 2x12 ADC modules (up to 10 input channels) |
| Audio | |
| Audio interfaces | I2S x3, S/PDIF Tx/Rx, ESAI x1, ASRC, Medium Quality audio System |
| Security | |
| Advanced Security | AES-128, ARM TrustZone, RNG |
| OS Support | |
| LINUX | Yocto, Debian, Buildroot |
| Temperature Range | |
| Industrial | –40 to +85°C (without Wi-Fi/BLE) |
| Extended | –25 to +70°C (with Wi-Fi/BLE) |
| Consumer | 0 to +70°C |
| Power Supply | |
| Input Voltage | 5V DC |
| Mechanical Dimension | |
| SOM Size | 67mm x 32mm x 4mm |
| Mechanical Connectors | |
| Antenna connector for Wi-Fi/BLE | U.FL on SOM |
| SoM Footprint | SODIMM200 |
| Other | |
| Altium Designer’s library file is available for all SoM variants (SCH and PCB) | |
Development Kit for I.MX6ULL (NXP), it includes following components:
- VisionCB-6ULL-STD
- VisionSOM-6ULL
- LCD-TFT Display
- Power Supply
- Ethernet and USB Cable
- Antenna
Starter Kit for I.MX6ULL (NXP), it includes following components:
- VisionCB-6ULL-STD
- VisionSOM-6ULL
VisionSOM-6ULL (SLS16Yx)
i.MX6-ULL NXP ARM Cortex-A7 single core industrial SoM computer
- Product Wiki
- VisionSOM-6ULL - Datasheet
- EM Radiation Test Precompliance Report (EMC) v1.x
- Default pin configuration (MEX file)
- VisionSOM-6ULL - Altium designer PCB/SCH library with 3D SoM and connector models
- VisionSOM-6ULL - STEP
- VisionSOM-6ULL - Product Brief
- I.MX6ULL - Fact Sheet
- ADV7511 - Driver for VisionSOM-6ULL
- PCN 4/2023 (change version from 1.1 to 1.2)
Carrier Board (CB) for the VisionSOM-6ULL with following main features:
- SODIM200 Interface
- 2xUSB 2.0
- 1x 10/100 Mbits Ethernet
- RGB Display Connector
- Arduino Connector
Carrier Board (CB) for the VisionSOM-6ULL with following main features:
- SODIM200 Interface
- 2xUSB 2.0
- 1x 10/100 Mbits Ethernet
- RGB Display Connector
- Embedded Real-Time Clock
- Industrial Temperature Range
7 inch LCD-TFT module (made by Powertip) with integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with single power rail +3.3V.
Compact Switching DC Power Supply 12V/2A with DC 5.5×2.1 connector and EU plug
2.4/5GHz Balance Flex Antenna with solder cable, U.FL connector, Molex 146153-0100
2.4GHz Flex Antenna with solder cable, U.FL connector, Taoglas FXP70.07.0053A
