Power Supply
SL-PS12V/2A/EU
SoMLabs Carrier Boards can be powered by USB (from computers) or an external power supply. The external power supply is needed for higher power consumption, e.g. when a TFT display is used in the application.
Switched-mode AC power supply 12V/2A with DC 5.5×2.1 connector and EU plug. The power supply has built-in overload, overvoltage and short-circuit protection. The power supply is Energy Efficiency Level V compliant. The length of the output cable is 1.2m.
The DC 5.5×2.1 plug can be plugged into the DC socket on the carrier board.
| Features | SL-PS12V/2A/EU |
|---|---|
| Output | 12V DC/2A |
| Input | 90..264V AC |
| DC Connector | 5.5x2.1 |
| Power | 24W |
| Plug Type | EU |
| Dimensions | 76.5x34x43mm |
| Operating Temperature | 0..40°C |
| Cable length | 1.2m |
Carrier Board (CB) for the VisionSOM-6ULL with following main features:
- SODIM200 Interface
- 2xUSB 2.0
- 1x 10/100 Mbits Ethernet
- RGB Display Connector
- Embedded Real-Time Clock
- Industrial Temperature Range
Carrier Board (CB) for the VisionSOM-6ULL with following main features:
- SODIM200 Interface
- 2xUSB 2.0
- 1x 10/100 Mbits Ethernet
- RGB Display Connector
- Arduino Connector
Carrier Board (CB) for the VisionSOM-8Mmini with following main features:
- SODIM200 Interface
- 1xUSB 2.0
- 1x 10/100/1000Mbit/s Ethernet
- PCI (Single Lane)
- MIPI Display Connector
- Built-in Segger J-Link JTAG debugger
Carrier Board (CB) for the VisionSOM-RT with following main features:
- SODIM200 Interface
- 2xUSB 2.0
- 1x 10/100 Mbit/s Ethernet
- RGB Display Connector
- Arduino Connector
Carrier Board (CB) for the VisionSOM-STM32MP1 with following main features:
- SODIM200 Interface
- 1xUSB 2.0
- 1x 10/100Mbit/s Ethernet
- RGB Display Connector
- MIPI Display Connector
- Built-in ST-Link/v2-1 SWD debugger
