VisionCB-8M-STD
Carrier Board for VisionSOM-8Mmini Module family
- Carrier Board (Base Board) compatible with the VisionSOM-8Mmini family of modules
- Ready-to-use development systems for building applications based on the VisionSOM-8Mmini modules
- MIPI-DSI (up to 4 lanes) LCD display interface
- MIPI-CSI (up to 4 lanes) camera interface
- PCIe (single lane) FPC connector
- Built-in microSD card connector
- Communication interfaces (USB 2.0 host and OTG, 10/100/1000 Mbit Fast Ethernet)
- Well-suited for applications in industrial automation
- Raspberry Pi and Arduino compatible connectors
- Ideal for industrial IoT, multimedia and embedded applications
- Built-in Segger J-Link JTAG debugger
VisionCB-8M-STD (with SOM with MPU iMX8M mini compatible) is a carrier board for the VisionSOM-8Mmini family of computer-on-modules which are powered by NXP SOC iMX8Mmini (quad core ARM Cortex-A53+ single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, PCIe, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The carrier board connects with the SoM (with iMX8M mini)) via a standard SODIMM connector.
VisionCB-8M-STD carrier board is equipped with Segger J-Link debugger and Linux serial console port on USB vCOM.
| Features | VisionCB-8M-STD |
|---|---|
| SoM Interface | |
| SoM Interface | SODIMM200 |
| SoM Type | VisionSOM family of modules based on NXP quad Cortex-A53 and single Cortex-M4 cores (iMX8Mmini) |
| Programming/Debug Connectors | |
| Built-in Segger J-Link JTAG debugger | |
| Expansion Connectors | |
| Raspberry Pi compatible connectors | 2x20 Pin Header (Male) |
| Arduino universal connector | Female Headers |
| SD card | dedicated MicroSD connector |
| Communication Connectors | |
| PCIe (single lane) | 16-pin FFC/FPC connector |
| Ethernet | 1x 10/100/1000Mbit/s, RJ45 |
| USB Host | 1x Type A connectors |
| USB-OTG | 1xMicroUSB connector |
| Console | 1x MicroUSB connector |
| Display and camera | |
| MIPI-DSI interface | 30-pin FFC/FPC connector |
| MIPI-CSI interface | 30-pin FFC/FPC connector |
| User Interface | |
| 4 User pushbuttons | |
| 2 System pushbuttons | |
| 4 User LEDs | |
| 2 System LEDs | |
| Power Supply | |
| DC connector | Input Voltage 9-12V DC |
| Temperature Range | |
| Consumer | 0 to +70°C |
| Mechanical Dimension | |
| Board Size | 160mm x 100mm x 18mm |
VisionCB-8M-STD
Carrier Board for VisionSOM-8Mmini Module family
| CPU Name | NXP i.MX8M mini |
| CPU Type | x4 Core ARM Cortex A-53 |
| RAM Capacity | up to 4GB |
| Flash Memory | up to 32GB |
| Ethernet | 1x Gigabit |
| USB | 2x USB 2.0 |
| Form Factor | SODIM200 |
MIPI-DSI to LVDS and/or HDMI display converter, compatible with SoMLabs carrier boards: VisionCB-8M-STD (dedicated to i.MX8M mini multicore MPU) and VisionCB-STM32MP1-STD (dedicated to STM32MP1 multicore MPU).
Compact Switching DC Power Supply 12V/2A with DC 5.5×2.1 connector and EU/UK/USA/AUSTRALIA adapters
2.4/5GHz Balance Flex Antenna with solder cable, U.FL connector, Molex 146153-0100
2.4GHz Flex Antenna with solder cable, U.FL connector, Taoglas FXP70.07.0053A
7 inch LCD-TFT module (Riverdi RVT70HSLNWC00) with LVDS interface, integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with +5V power rail.
7 inch LCD-TFT module (Riverdi RVT70HSMNWC00) with MIPI-DSI interface, integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with typical power rails: +3.3V and +5V.
