SpaceCB-8Mplus-ADV
Advanced Carrier Board for SpaceSOM-8Mplus AI/ML module family
- Advanced Carrier Board (Base Board) compatible with the SpaceSOM-8Mplus family of modules
- Ready-to-use development systems for building applications based on the SpaceSOM-8Mplus modules
- HDMI + MIPI-DSI + LVDS (up to 8 lanes) displays interfaces
- 2xMIPI-CSI (up to 4 lanes) camera interface
- M.2 key M connector (2242, 2260 and 2280 sizes)
- Simplex RS485 interface
- 2 x CAN-FD interface
- 24-bit audio codec
- Built-in microSD card connector
- Communication interfaces (USB 3.0 and USB C, 2 x 10/100/1000 Mbit Ethernet)
- Well-suited for applications in industrial automation
- Ideal for industrial IoT, multimedia and embedded applications
- Built-in Segger J-Link JTAG debugger
SpaceCB-8Mplus-ADV is advanced carrier board for the SpaceSOM-8Mplus family of computer-on-modules equipped with Neural Processing Unit (AI/Machine Learning applications). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB 3.0, Ethernet, PCIe 3.0 (M.2), RS485, CAN FD, HDMI, LVDS, MIPI-DSI, MIPI-CSI, audio codec, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The carrier board connects with the SoM via a standard SODIMM connector.
SpaceCB-8Mplus-ADV carrier board is equipped with Segger J-Link debugger and Linux serial console port on USB vCOM.
| Features | SpaceCB-8Mplus-ADV |
|---|---|
| SoM Interface | |
| SoM Interface | SODIMM260 |
| SoM Type | SpaceSOM family of modules based on NXP quad Cortex-A53, single Cortex-M4 and NPU cores (iMX8Mplus) |
| Programming/Debug Connectors | |
| Built-in Segger J-Link JTAG debugger | |
| Expansion Connectors | |
| GPIO/Serial | 2x20 Pin Header (Male, 2.54 mm) |
| SD card | dedicated MicroSD connector |
| Communication Connectors | |
| PCIe (single lane) | M.2 key M connector (2242, 2260, 2280) |
| Ethernet | 2x10/100/1000Mbit/s, RJ45 |
| 2x CAN FD | 1x3 Pin Header (Male, 2.54 mm) |
| Simplex RS485 | 1x3 Pin Header (Male, 2.54 mm) |
| USB 3.0 | 1xType A connectors |
| USB C | 1x connector |
| Console | 1x MicroUSB connector |
| Display and camera | |
| HDMI output | HDMI connector |
| LVDS output | 2 x 22-pin FFC/FPC 0.5mm connectors |
| MIPI-DSI interface | 1 x 30-pin FFC/FPC connector |
| MIPI-CSI interface | 2 x 30-pin FFC/FPC connector |
| Audio | |
| Stereo Headphone & Mic | Mini Jack 4 poles |
| Headphone Output Power | 40 mW/16 Ohm |
| Speaker BTL Output Power | 1 W/8 Ohm |
| User Interface | |
| 4 User pushbuttons | |
| 1 System pushbuttons | |
| 4 User LEDs | |
| 3 System LEDs | |
| Power Supply | |
| DC connector | Input Voltage 9-12V DC |
| Temperature Range | |
| Consumer | 0 to +70°C |
| Mechanical Dimension | |
| Board Size | 160mm x 100mm x 25mm |
SpaceCB-8Mplus-ADV
Advanced Carrier Board for SpaceSOM-8Mplus AI/ML module family
Compact Switching DC Power Supply 12V/2A with DC 5.5×2.1 connector and EU plug
Compact Switching DC Power Supply 12V/2A with DC 5.5×2.1 connector and EU/UK/USA/AUSTRALIA adapters
2.4/5GHz Balance Flex Antenna with solder cable, U.FL connector, Molex 146153-0100
2.4GHz Flex Antenna with solder cable, U.FL connector, Taoglas FXP70.07.0053A
5Mpx HD camera module with MIPI-CSI interface, integrated PMIC and OV5640 CMOS color video sensor. Module is equipped with internal multichannel power source with sequencer that allows to work with single power rail +3.3V.
| CPU Name | NXP i.MX8M plus |
| CPU Type | x4 Core ARM Cortex A-53 |
| RAM Capacity | up to 4GB |
| Flash Memory | up to 32GB |
| Ethernet | 2x Gigabit |
| USB | 2x USB 2.0/3.0 |
| Form Factor | SODIM260 |
7 inch LCD-TFT module (Riverdi RVT70HSLNWC00) with LVDS interface, integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with +5V power rail.
7 inch LCD-TFT module (Riverdi RVT70HSMNWC00) with MIPI-DSI interface, integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with typical power rails: +3.3V and +5V.
