SL-TFT7-TP-800-480 [NRND]
7 inch LCD-TFT module with touch capacitive panel controller and integrated DC/DC converters

  • Screen size 7 inch
  • Display matrix size 800×480 px
  • LCD-TFT RGB technology
  • Parallel display interface (24 b RGB)
  • Built-in capacitive touch panel and TP controller
  • Bulit-in LED backlight
  • Single +5V rail power supply
  • Operating temperature -20÷+70°C
  • Fully compatible with VisionCB-STD (FPC A-A cable)

SL-TFT7-TP-800-480 is display module based on PH800480T013 Powertip high quality 7 inch RGB LCD-TFT.  Display is equippped with built-in capacitive touch panel and integrated touch panel controller (I2C). Module SL-TFT7-TP-800-480-P contains all DC/DC  converters that are necessary for single rail power supply (+5V).
LCD-TFT display matrix size is 800×480 pixels (RGB, 24 bits), communication and data interface are TTL-LV (3.3V) compatible.
FPC 50-pin 15-cm flat cable (A-A) is included.

Features SL-TFT7-TP-800-480
Module
Input voltage single +5V/<400 mA (incl. backlight)
Video and TP interface voltage 3.3V
Default scanning configuration U2D, L2R
Default dithering function ON
Display
Screen size 7 inch
Resolution 800 x 480 px (RGB)
Display active area 154.08 x 85.92 mm
Operating temperature -20÷+70°C
Graphic interface parallel 24 b + H + V (3.3V)
Display module Powertip PH800480T013-IBC15
Touch panel
Type Capacitive
Controller FT5426
TP interface I2C (3.3V)
Mechanical Dimension
Module size 192.96 x 110.76 x 10.8 mm
Mechanical Connector
Connector FPC50, 1:1 compatible with:
VisionCB-STD v.1.0,
VisionCN-STD v.1.4
Block diagram

Carrier Board (CB) for the VisionSOM-6ULL with following main features:

 

  • SODIM200 Interface
  • 2xUSB 2.0
  • 1x 10/100 Mbits Ethernet
  • RGB Display Connector
  • Arduino Connector

Carrier Board (CB) for the VisionSOM-RT with following main features:

 

  • SODIM200 Interface
  • 2xUSB 2.0
  • 1x 10/100 Mbit/s Ethernet
  • RGB Display Connector
  • Arduino Connector

Carrier Board (CB) for the VisionSOM-STM32MP1 with following main features:

 

  • SODIM200 Interface
  • 1xUSB 2.0
  • 1x 10/100Mbit/s Ethernet
  • RGB Display Connector
  • MIPI Display Connector
  • Built-in ST-Link/v2-1 SWD debugger