StarCB-6ULL-STD
Carrier Board for StarSOM-6ULL Module family
- Carrier Board (Base Board) compatible with the StarSOM family of modules
- Ready-to-use development systems for building applications based on the StarSOM modules
- Well-suited for applications in industrial automation
- Communication interfaces (USB 2.0 host and OTG, 100 Mbit Fast Ethernet)
- Raspberry Pi compatible connector
- Ideal for industrial IoT and embedded applications
StarCB-6ULL-STD is a carrier board for the StarSOM-6ULL family of computer-on-modules, which are powered by NXP i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The carrier board connects with the SoM via a board-to-board, low profile connectors.
| Features | StarCB-6ULL-STD |
|---|---|
| SoM Interface | |
| SoM Interface | low-profile board-to-board connectors 2x100 pins |
| SoM Type | StarSOM family of modules based on NXP NXP i.MX6ULL processor (ARM Cortex-A7 single core) |
| Expansion Connectors | |
| Raspberry Pi compatible connectors | 2x20 Pin Header (Male) |
| QSPI/GPIO | 2x5 Pin Header (Male) |
| Communication Connectors | |
| Ethernet | 1x 10/100Mbit/s, RJ45 |
| USB Host | 1x Type A connector |
| USB OTG | 1x MicroUSB B connectors |
| Console | 1x MicroUSB B connector (via FTDI FT230 UART to USB converter) |
| Display | |
| Interface | 50-pin FFC/FPC Parallel RGB – 24-bit, (1366 x 768 Max. Resolution) |
| User Interface | |
| 5 Pushbuttons | |
| 5 LEDs | |
| Power Supply | |
| DC connector | Input Voltage 9-12V DC |
| Temperature Range | |
| Consumer | 0 to +70°C |
| Mechanical Dimension | |
| Board Size | 130mm x 90mm x 20mm |
StarCB-6ULL-STD
Carrier Board for StarSOM-6ULL Module family
7 inch LCD-TFT module (made by Powertip) with integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with single power rail +3.3V.
Compact Switching DC Power Supply 12V/2A with DC 5.5×2.1 connector and EU plug
Compact Switching DC Power Supply 12V/2A with DC 5.5×2.1 connector and EU/UK/USA/AUSTRALIA adapters
2.4/5GHz Balance Flex Antenna with solder cable, U.FL connector, Molex 146153-0100
2.4GHz Flex Antenna with solder cable, U.FL connector, Taoglas FXP70.07.0053A
| CPU Name | NXP i.MX6ULL |
| CPU Type | x1 Core ARM Cortex-A7 |
| RAM Capacity | up to 1GB |
| Flash Memory | up to 32GB |
| Ethernet | 2x 10/100 Mbit/s (single PHY) |
| USB | 2x USB 2.0 |
| Form Factor | square shaped (b2b connectors) |
