Compact and efficient fan designed for use with SoMLabs’ heatsinks. The YDM2006C05F Micro Fan is compatible with SomLabs’ heatsinks dedicated to multimedia NXP processors.

The SL-HEATSINK-85x40x10-AR is red coated, aluminium, extruded, industrial heatsink for SoM produced by SoMLabs.

MIPI-DSI to embedded Display Port eDP and/or HDMI display converter, compatible with all SoMLabs carrier boards equippped with MIPI-DSI output: VisionCB-iMX93-STD, SpaceCB-8Mplus-ADV, VisionCB-8M-STD, VisionCB-x2L-STD, VisionCB-STM32MP1-STD (dedicated to STM32MP1 multicore MPU) and others.

Extruded aluminium heatsink dedicated to SoM produced by SoMLabs with self-adhesive, thermoconductive tape.

Extruded aluminium heatsink dedicated to SoM produced by SoMLabs with self-adhesive, thermoconductive tape.

Extruded aluminium heatsink dedicated to SoM produced by SoMLabs with self-adhesive, thermoconductive tape. The maximum thermal resistance is 18.8K/W and maximum dissipation loss 4.1W.

Carrier Board (CB) for the StarSOM-STM32H757 with following main features:

• 2x 100 low profile, pin board to board connectors
• 1xUSB 2.0 host
• 1x USB-OTG
• 1x 10/100 Mb/s Ethernet
• MIPI-DSI (display) and parallel LCD Connectors
• 24-bit Audio Codec
• ST-Link on-board
• CAN and RS485 Interfaces
• MicroSD connector

Carrier Board (CB) for the SpaceSOM-8Mplus with following main features:

• SODIM260 Interface
• 1xUSB 3.0
• 1xUSB C
• 2x 10/100/1000Mbit/s Ethernet
• PCI 3.0/M.2 (Single Lane) 
• 2xCAN-FD & RS485
• HDMI, LVDS, MIPI Connectors
• Built-in Segger J-Link JTAG debugger

Carrier Board (CB) for the VisionSOM-iMX93 with following main features:

• 1xUSB Host
• 1xUSB-OTG
• 2x 10/100/1000 Mbit Ethernet
• MIPI-DSI and LVDS display connectors
• MIPI-CSI for digital camera
• Stereo audio codec
• CAN interface with physical layer
• RS-485 interface with physical layer

Development Kit for i.MX8Mplus MPU (NXP), it includes following components:

• SpaceCB-8Mplus-ADV
• SpaceSOM-8Mplus
• LCD-TFT Display (with MIPI-DSI interface)
• Power Supply
• Ethernet and USB Cable
• Antenna

4 channel high-speed UART hub with PCIe system interface

4 channel USB 2.0 hub with PCIe system interface

Extruded aluminium heatsink dedicated to SoM produced by SoMLabs with optional bracket and fan. The maximum thermal resistance is 18.9K/W and maximum dissipation loss 3.9W.

Extruded aluminium heatsink with pins, dedicated to SLC5 single board computer (TitanSBC-8Mmini). Thermal resistance 15.2K/W, maximum dissipation loss 4.2W.

7 inch LCD-TFT module (Riverdi RVT70HSTNWC00 or RVT70HSTFWCA0) with parallel RGB interface, integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with +5V power rail.

7 inch LCD-TFT module (Riverdi RVT70HSLNWC00) with LVDS interface, integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with +5V power rail.

7 inch LCD-TFT module (Riverdi RVT70HSMNWC00) with MIPI-DSI interface, integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with typical power rails: +3.3V and +5V.

Multiprotocol communication interface for StarSBC-6ULL equipped with RS232, RS485 and CAN physical interfaces

M.2 key M to PCIe adapter compatible with 2242, 2260 and 2280 modules equipped with single lane interface

5Mpx HD camera module with MIPI-CSI interface, integrated PMIC and OV5640 CMOS color video sensor. Module is equipped with internal multichannel power source with sequencer that allows to work with single power rail +3.3V.

MIPI-DSI to LVDS and/or HDMI display converter, compatible with all SoMLabs carrier boards equippped with MIPI-DSI output: VisionCB-iMX93-STD, SpaceCB-8Mplus-ADV, VisionCB-8M-STD, VisionCB-x2L-STD, VisionCB-STM32MP1-STD (dedicated to STM32MP1 multicore MPU) and others.

Carrier Board (CB) for the VisionSOM-8Mmini with following main features:

• SODIM200 Interface
• 1xUSB 2.0
• 1x 10/100/1000Mbit/s Ethernet
• PCI (Single Lane) 
• CAN FD & RS485 Header 
• HDMI, LVDS, MIPI Connector
• Built-in Segger J-Link JTAG debugger

Development Kit for I.MX8Mmini (NXP), it includes following components:

• VisionCB-8M-ADV
• VisionSOM-8Mmini
• LCD-TFT Display
• Power Supply
• Ethernet and USB Cable
• Antenna

Starter Kit for I.MX8Mmini (NXP), it includes following components:

• VisionCB-8M-STD
• VisionSOM-8Mmini

Development Kit for STM32MP157 (STM), it includes following components:

• VisionCB-STM32MP1-STD
• VisionSOM-STM32MP1
• LCD-TFT Display
• Power Supply
• Ethernet and USB Cable
• Antenna

Starter Kit for STM32MP1 (STM), it includes following components:

• VisionCB-STM32MP1-STD
• VisionSOM-STM32MP1

Development for i.MXRT (NXP), it includes following components:

• VisionCB-RT-STD
• VisionSOM-RT
• LCD-TFT Display
• Power Supply
• Ethernet and USB Cable

Starter Kit for I.MXRT (NXP), it includes following components:

• VisionCB-RT-STD
• VisionSOM-RT

Development Kit for I.MX6ULL (NXP), it includes following components:

• VisionCB-6ULL-STD
• VisionSOM-6ULL
• LCD-TFT Display
• Power Supply
• Ethernet and USB Cable
• Antenna

Starter Kit for I.MX6ULL (NXP), it includes following components:

• VisionCB-6ULL-STD
• VisionSOM-6ULL

7 inch LCD-TFT module (made by Powertip) with MIPI-DSI interface, integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with single power rail +3.3V or +5V (optionally).

NO LONGER AVAILABLE!

Carrier Board (CB) for the VisionSOM-8Mmini with following main features:

• SODIM200 Interface
• 1xUSB 2.0
• 1x 10/100/1000Mbit/s Ethernet
• PCI (Single Lane) 
• MIPI Display Connector
• Built-in Segger J-Link JTAG debugger

Carrier Board (CB) for the VisionSOM-V2L and VisionSOM-G2L  with following main features:

• SODIM200 Interface
• 1xUSB 2.0
• 1x 10/100/1000Mbit/s Ethernet
• 1 x CAN + 1 x RS485
• codec audio
• MIPI Display and Camera Connectors
• Built-in Segger J-Link JTAG debugger

Carrier Board (CB) for the VisionSOM-STM32MP1 with following main features:

• SODIM200 Interface
• 1xUSB 2.0
• 1x 10/100Mbit/s Ethernet
• RGB Display Connector
• MIPI Display Connector
• Built-in ST-Link/v2-1 SWD debugger

Carrier Board (CB) for the StarSOM-6ULL with following main features:

• low-profile 2 x 100 pins board-to-board interface
• 1xUSB 2.0 host
• 1xUSB-OTG
• 1x 10/100 Mbit Ethernet
• RGB Display Connector
• 10 pins GPIO Connector

7 inch LCD-TFT module (made by Powertip) with integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with single power rail +3.3V.

Carrier Board (CB) for the VisionSOM-RT with following main features:

• SODIM200 Interface
• 2xUSB 2.0
• 1x 10/100/1000 Mb/s Ethernet
• MIPI-DSI (display) and MIPI-CSI (camera) Connectors
• 24-bit Audio Codec
• DAP Debug Interface
• CAN and RS485 Interfaces

Carrier Board (CB) for the VisionSOM-RT-ETH with following main features:

• SODIM200 Interface
• 2xUSB 2.0
• 1x 10/100 Mbit/s Ethernet
• RGB Display Connector
• Arduino Connector

Carrier Board (CB) for the VisionSOM-RT with following main features:

• SODIM200 Interface
• 2xUSB 2.0
• 1x 10/100 Mbit/s Ethernet
• RGB Display Connector
• Arduino Connector

Carrier Board (CB) for the VisionSOM-6ULL with following main features:

• SODIM200 Interface
• 2xUSB 2.0
• 1x 10/100 Mbits Ethernet
• RGB Display Connector
• Embedded Real-Time Clock
• Industrial Temperature Range

7 inch LCD-TFT module (made by Powertip) with integrated LED backlight and capacitive touch panel. Module is equipped with DC/DC converters that allows to work with single power rail +5V.

NO LONGER AVAILABLE!

Standard SODIMM 200 DDR2, 1.8V socket

TE Part # 1473005-4

2.4/5GHz Balance Flex Antenna with solder cable, U.FL connector, Molex 146153-0100

2.4GHz Flex Antenna with solder cable, U.FL connector, Taoglas  FXP70.07.0053A

2.4GHz Wi-Fi Antenna, 5dBi, U.FL connector, 190mm Width

Compact Switching DC Power Supply 12V/2A with DC 5.5×2.1 connector and EU plug

Carrier Board (CB) for the VisionSOM-6ULL with following main features:

• SODIM200 Interface
• 2xUSB 2.0
• 1x 10/100 Mbits Ethernet
• RGB Display Connector
• Arduino Connector

Compact Switching DC Power Supply 12V/2A with DC 5.5×2.1 connector and EU/UK/USA/AUSTRALIA adapters